Arduino Compatible Pro Mini

Arduino Pro Mini 5V 16MHz

The Arduino Pro Mini 5V 16MHz is a compact and cost-effective microcontroller board compatible with the Arduino Pro Mini series. Powered by a 16MHz Atmel Mega 328P processor, it is suitable for both simple and complex projects.

Key Features:

• Size: 33mm x 18mm x 5mm (without headers)
• Input Voltage: 5-9V recommended
• Digital I/O: 14 pins (6 PWM capable)
• Analog Inputs: 8 with 10-bit resolution
• Max Output Current: 40mA per pin, 150mA total
• Memory: 32KB Flash (2KB for bootloader)
• Programming: Requires a serial interface (USB-to-Serial converter or FTDI breakout board)

Programming Connections:

• GND: GND (Serial Adapter) -> GND (Arduino Pro Mini)
• VCC: VCC (Serial Adapter) -> VCC (Arduino Pro Mini) [Set to 5V]
• TX: TX (Serial Adapter) -> RX1 (Arduino Pro Mini)
• RX: RX (Serial Adapter) -> TX0 (Arduino Pro Mini)
• DTS: DTS (Serial Adapter) -> DTR (Arduino Pro Mini) [May be labeled RTS/DTR]

IDE Setup:

1. Select 'Arduino Pro or Pro Mini' as the board type.
2. Choose 'ATMega328 5V 16MHz' as the processor.
3. Ensure your Serial Port adapter is selected.
4. The board supports Auto-Reset via DTS, so no need to press the reset button manually.

This makes the Arduino Pro Mini 5V 16MHz an ideal choice for a wide range of electronic projects due to its compact size, lower cost, and reduced power consumption.